Category: Lacquer
-
Piasecki HUP Retriever – Part Three – The Temperature Gradient
Or ” How to build scale models without dying in the process “. The interior of the Little Workshop was over 42º Celsius one afternoon. No surprise – it was predicted to be a hot, still Sunday and the prediction was accurate. Also no surprise – this was Western Australia in the summertime. We saw…
-
Bell Model 47 – Part Three – The Bubble
Well, that was a surprise. I opened the Italeri box one morning at the modelling club and the helicopter landed, finished, on my studio table at 4:30 PM next day. And there was time in between working on it to put the camouflage colours on the CH-147 Chinook. I’ve no idea what this indicates in…
-
Boeing Vertol CH 147 Chinook – Part Five – Whatever Happened To Sky??
Specifically, whatever happened to the colour Sky as applied to the underside of British and Commonwealth aircraft? The underside of this Canadian CH 147 Chinook seems distinctly visible, as the bronze-black and deep green camo scheme – as admirable as it seems on the top and sides of the helicopter – wrap around down under…
-
Boeing Vertol CH 147 Chinook – Part Four – The Blue Mask Of Courage
No, you haven’t wandered into a Marvel comic – the blue mask of courage does not fight crime. It covers things up…rather like a bottled version of a parliamentary enquiry. Except it smells better. Youve read here of my efforts to mask clear canopies on 1:72 scale aircraft by various means; tape squares, Humbrol rubber…
-
Unsticking – Part Three – The Results
Well the experiment went as planned – I waited 24 full hours before masking and spraying two mules. I checked that the red surfaces felt absolutely dry, then used both the cheap and the expensive masking tape to make a pattern. A spray with the vile turquoise colour and an hour’s wait until it had…
-
Unsticking – Part Two – The Experiments
The mules were back in business today – 8 plastic panels coated with aqueous acrylic paint – 4 with the same Mr. Hobby gloss red that featured on the Piasecki Flying Banana – four with a Tamiya flat red. I sprayed, then let the paint cure in a hot workshop for a couple of hours.…
-
Macchi MC 205 Veltro – Part Three – The Great Azure Blue Quest
I think I may claim a modest victory today. I pursued RAF Azure Blue paint and overtook it. The quest started with that RAF Digital colour chart I found on the net. It lists all the major paints used in WWII RAF aircraft, Shows them in a clear panel, and then gives the RGB and…
-
Macchi MC 205 Veltro – Part Two – There We Was…
Well, Poo…I realised today that I published Part Four before Part Two and Part Three. You must have gotten a disjointed view of the process. Forgive me and read on today and tomorrow – you’ll get the rest of the story. Blame early mornings… There we was at the Men’s Shed session of the…
-
Macchi MC 205 Veltro – Part Four – The Flying Fellah
Note to readers: This post went out in error several days ago – it was shelved and reopened today, to provide the final chapter. Wheter that makes any sense or not is debatable, but then this is me writing and you reading… See, I didn’t go mad after all. Or madder, if you want to…
-
Morane Saulnier 406 – Part Four – Contact – Ignition – Chocks Away
Actually, in the period between Christmas and New Years and I don’t think I could’ve faced any more chocs or contact. I retreated to the Little Workshop and put the finishing touches on the Morane Saulnier. How different an aircraft can look when the final paint is on – as opposed to the bare parts…
The Little World 