Tag: filling
-
Fokker D.XXI – Part Two – Dutch Canals
And a surprise – as the rest of this MPM kit fit together superbly. The gaps either side of the wing fillet were the only areas on this fighter that needed a filling. Fully deep, but narrow, possible to bridge with Vallejo acrylic putty. It dries quickly enough not to be an impediment to the…
-
Mitsubishi Betty – Part Two – Not-So-Ghostly Seam
I wondered what that cracking noise was… It was the top fuselage seam giving way. I must have flexed a wing too much and surpassed the tensile strength of the thin cement used to seal the fuselage. Well that’s what undercoat painting is designed to catch – the flaw that occurs before you add a…
-
Swedish NA-16 – Part Three – Dr. Phil
Not the TV chap – I’m thinking this kit should have been built by the famous Irish dentist: Dr. Phil McCavity. Six separate applications and removals of two grades of putty plus a styrene sheet fitted to the worst of the gaps. All done in a cheerful frame of mind and without the aid of…
-
Tasman Airspeed Oxford Mk I – Part Four – While The Goo Sets…
Busy your hands, to stop your mind from screaming. The engine cowlings on this model have become a standard mark in my workshop. They form the nadir from which anything else is better. I have joined the halves and lit a votive candle. The interior is bare, but surprisingly neat. It is simple, of course,…
-
Grumman Hawkeye – Part Two – Filling And Filing
And not just in one stage, either. When you take on an older kit, you accept the limitations of the art at the time that it was made. You can build it with the skills of that time or with modern ones. Either way is a sort of compromise. Here we have a combination of…
-
RCAF Wellington Mk II – Part Four – It’s No Sin To Fill
But it’s no great honour, either… I’ve no idea if Tevye built model airplanes, but if he did, he would have been philosophical about it. For my part I accept the inevitability of gaps and defects and the need for a good fill and sand. AIrfix, on the other hand seem to have decided to…
-
US Navy Phantom II – Part Two – The Sixties Return
In my case, without the hair… I don’t care – if the era came back with half this much success, I would be delighted. So far the old Airfix Series 3 kit is doing very well indeed. The basic structure went together at one afternoon session. However, it was never going to go together without…
-
Catalina Mk IV B – Part Two – Major Surgery
In the case of this aircraft, it is going to go from an amphibian to a flying boat. The wheels are to be removed. The landing gear boxes for the PBY 5 are cemented on all sides, but fortunately the ones on this kit had escaped some of the glue. A few strokes of the…
-
Bellanca Pacemaker – Part Three – Seams We Need To Fill Something
If you paid more to read these posts, the jokes would be better. The fuselage on the Dora Wings is a model…of course it’s a model…of sturdiness. Once the sides and top come together with some liquid cement and dry for a night the whole is greater than the parts. But there is a discrepancy…
-
Blackburn Buccaneer – Part Three – Well, It Is…
…What it is… The engine compartment is full now, and it’s time to mate the sections of fuselage and attach the wings and tail. The initial dismay at the fit of these things can be alleviated with a little discrete carving and sanding, and the lips of the mouldings at least come pretty close to…
The Little World 