Tag: putty
-
Revell SPAD XIII – Part Two – Grinning And Bearing It
Well, it is a vintage kit… The Revell SPAD XIII is going to look good, I tell myself. The large dollop of Mr. White Putty cut with levelling thinner is only to be expected. Also the superglue run into the tail gaps and the Vallejo squirt putty elsewhere. I have not reached for a tin…
-
Hawker Demon – Part Two – That Sinking Feeling
Bovril would have prevented this… Actually the problem is ejector post marks in the wings of the Demon. They are as marked as any I’ve ever seen, but fortunately Airfix configured the mould to place them on the underside of the wings and tailplane. Equally fortunatly I have an unused tube of Mr. Hobby white…
-
Wenn Ist Genug?
A question for all of us – but in this case for the model builder who is puttying up their kit. When do you stop? a. When all the seam lines are full. b. When you run out of putty. c. When you have lost the will to live. If ( b. ) or (…
-
‘Tis A Gift To Be Simple…
And ’tis even a greater gift when the simplicity comes free…and at the proper time. I have no idea where the instrument seen in the heading image came from. It has been setting in the odd-tool drawer of my modelling cabinet for years. I suspect it came from an art supply store or was remaindered…
-
RCAF Twin Otter – Part Four – The Canvas Stretched
The Twin Otter fuselage is closed, puttied, and smoothed. The wings are ready for their undercoat. All the ancillary parts are stuck to bits of matchstick or alligator clips awaiting the airbrush. It’s at this point that sprue trees in a box have become an aircraft. There’s still plenty of work to do but the…
-
North American Sabre – Part Two – Two Evenings
I settled into a pleasant routine of an day – since the weather has turned hot I have decided to adjourn at 1:00 PM to the indoor modelling desk and complete small tasks. If these are brush painting or cementing jobs I can do them in comfort – the Little Computer room has an air…
-
Douglas A-20 Havoc – Part Three – Subassembly Time
The Douglas Havoc by MPM models ( are they the same as Special Hobby? I’ll have to Czech up on that…) is old school in that it is all injection moulding – no resin or brass to confuse the issue. I welcome this but will have to do some cheap detailing in the cockpit if…
-
Spitfire Mk IX – Part Two – The Patchwork Quilt
I am always in awe of the kit builder who has every seam perfect, every wheel straight, and every panel line scribed out. Awe and horror. Awe, horror, and unreasoning anger… Well, it’s not quite that bad, but I do regard perfection with some suspicion. Fortunately the Matchbox Spitfire Mk IX is a very soothing…
-
MiG 15 – Part Four – Seams To be Working
The anhedral of the MiG 15 wings… -3º…was cranked into the build today and I like to think it was successful. You’ve seen the jigging in the last post. The cementation was Mr. Cement Deluxe smeared on both the wing and the fuselage. It sets up pretty quickly and goes hard enough for jazz well…
-
Supermarine Spitfire Mk XIX – Part Two – ” Well! Excuse Me! “
Oops! Sorry, madam. I have intruded upon you while you are in a state of composition. One might take pictures of a lady in a state of undress, but one should never do so when she only has half her make-up on. I seem to have caught the new PRU spitfire with putty in her…
The Little World 